This program demonstrates a SIMPL windows and VTPro-e sample project for the Pro2 with a CEN-TRACK interface. The CEN-TRACK interface includes control of an ATC-AMFMXM (AM/FM/XM), ATC-AMFM2 (dual AM/FM) and ATC-AMFMSR (AM/FM/Sirius) tuner card.
This program contains a default IP Table. When loading the system, be sure to load the Default IP Table when prompted by Toolbox. You will have to manually edit Pro2's IP Table specifically for the CEN-TRACK entry. The communication between a Pro2 and CEN-TRACK is CIP, which requires an IP Address and not the loopback (127.0.0.1). Please refer to Pro2's IP Table Configuration below for more detail.
Also be sure to configure the IP tables on the CEN-TRACK, TPMC-8X, TPMC-4X and ethernet touch panels to point to the Pro2 system.
You will have to edit the CEN-TRACK's IP Table to point back to the Pro2. To edit via CEN-TRACK's Front Panel "Installer Tools", please refer to the CEN-TRACK's Installer Tools IP Table Setup for more detail. Also please refer to CEN-TRACK's IP Table Configuration below to see what the IP Table should look like.
The correct IPIDs are shown below.
↧
