Adds Pandora Support.
This program demonstrates basic programming for the ATC-AUDIONET card installed in a CEN-TRACK, controlled by a PRO2 controller.
Also included is an XPanel user interface.
This program contains a default IP table. When loading the system, be sure to load the Default IP Table when prompted by Crestron Toolbox.
Otherwise, the IP Table can be sent to your control system via Toolbox after program load.
The IPID for each device is shown below.
By default, the ATC-AUDIONET uses DHCP to obtain appropriate network settings. Static settings can be configured via the front panel of the CEN-TRACK or through toolbox. Please refer to the Installation & Operations Guide for the ATC-AUDIONET card for more detail as DNS settings for the card as well as user interfaces are required for full functionality.
↧